Steel frames are now at Viking Cycles and Alien v3 frames can be seen here
|
 |
wheelsets
Deep section (32mm) pinned joint rimmed track wheelset. 36 spokes laced 3-cross to quiality high-flange hubs. These wheels are strong. Nice smooth elliptical shape rim with no protruding ridges. Available in satin black, or polished silver.
Weight: 1100g each.
|
only
$159
|
|
|
Cranksets
Andel cold-forged track cranks
with 1/8" 144BCD 46T CNC'd chainring. 165mm, square
taper. These are nice with a nice thick chainring and
no ugly hokeyiness like the chainring mounted on the
inside of the spiders or anything like that.
For a ~42mm chainline, use a 110mm bottom bracket.
|
only
$79
|
|
|
hubs
High flange cartrige
bearing hubs. These snazzy hubs are available in
front or rear, silver or black, 36 hole. The rears
are 120mm spaced and include a 1/8„ 16T cog and
lockring. The cog is not that great so if you ride
aggro (skids, etc) a high quality CNC'd cog is
suggested. These are single-sided so they are
threaded on one side only for a fixed cog and
lockring. The extra unused threads on flip-flop hubs
grate against my sensibilities. I like it clean,
fixed all the way. The axles are hollow and are
paired with nice track nuts.
Flange diameter 62mm / Rear flange to center 28mm /
Front flange to center 33mm |
from
$34
|
|
|
|
cogs and chains
Quality CNC machined
1/8" track cogs. Available in 16 or 18 teeth
versions. Recommended as a tougher replacement for
the stamped cog that comes with the wheels and hubs.
If you ride aggressively, or with a small chainring
(equals high torque), these are the way to go.
A strong chain is a good thing! These chains are
good quality with a high 1000kgf yield. Nickel-plate
finish, 1/8" width. |
only
$9
|
